Products::Rifle Barrels::Savage Replacement Barrels
For years shooters have enjoyed the flexibility of the Savage Shooting System.
The ability to have one gun that is capable of having multiple caliber barrels each having its specific purpose has always been desired by shooters. Combine the design of this action with the accuracy of a Shilen Barrel and the combination will be lethal, (to the target that is).
Shilen Savage Barrels come threaded and fully chambered ready to be installed into the action with no additional machining or modification needed. Barrel finish will be polished for stainless and blued for chrome-moly. The customer may pick the finish length of their choice. There is an additional charge for lengths longer than 26".
Each barrel comes with the following crown based on the contour of the barrel:
Sporter - Radius Crown
Heavy Sporter - Recess Target Crown
Varmint - Recess Target Crown
Bull - 11 Degree Crown
Bead blast Matte available in stainless steel for an additional $35. Contours available to closely match factory contours and should require very little to no stock work.
See our Chamber page for available cartridge options. **NOTE: Savage is NOT available in .585" boltface cartridges such as the .338 Lapua.**
We HIGHLY RECOMMEND that actual headspace gauges be used to determine if a barrel is properly installed and head spaced. In our opinion, this is the safest way to guarantee you will come back for more barrels.
NOTE: Savage is made in two shank dimensions and we recommend you contact Savage to verify your shank dimensions.
See below for contours and dimensions.
|S3, Savage Sporter *||1.060||.585||22|
|S4, Savage Heavy Sporter||1.060||.685||26|
|S7, Savage Varmint||1.060||.800||26|
|S8, Savage Bull Barrel||1.060||1.00||26|
|S1, Savage LARGE Bull **||1.120||1.00||26|
|Chrome-moly Match Grade (blued finish)||$ 374.00|
|Stainless Match Grade||$ 374.00|
|Stainless Select Match||$ 449.00|
* Sporter - - - .284 & down
** Large Bull - - - Barrel is only available for a large shank thread
Standard Shanks - 1.050 x 20tpi
Large Shanks - 1.112 x 20tpi - There will be a step in diameter right at Dimension A.